Laybrick 250g 3mm

Laybrick 250g 3mm
€ 17.28 incl tax
excluding shipping

LAYBRICK a rough filament for large architecture models.

You get: A trial amount of 3mm 250g

  • near zero warp!
  • the filament is printable from smooth to very rough surface, near sandstone
  • for architecture models / landscapes
  • no plastic feeling,
  • ideal for jumbo-printers/ read below about beta!!!
  • the objects are ink-able, grind-able
  • no heated bed necessary
  • contains naturelal mineralic fillers (super-fine milled chalk) and
  • harmless co-polyesters
  • print temp: 165°C to get smooth, higher temperatures (210°) will print rougher surfaces, fan needs to be on
  • use M227 code: f.e. S 30000 P 10000
  • you may print layer-thickness from 0.1 mm to 0.5 mm
  • slicing: object fill max. 25%,
  • fan needs to be on!
  • wait after printing until object is hardened, then remove it from platform (2-4 hours)
  • the printed object is temperature stabil to about 70° Celsius
  • print in rooms with more than 20°C, the filament ist more bendable then!

Beta version of this filament: means that the grey colour of the filament may change in nuances, the filament is also a little maiden, it may brake while bending, you should be sure (especially during a long print) that you can feed a broken part of filament again in your printer!